Backup Boot Flash Module D8W

The Dual SO8W Backup Boot Flash is an ingenious tool created by DediProg to force the application controller to work automatically on the two backup Serial Flash inserted in the SO8W (207 mil) sockets and not on the two Main Serial Flash soldered onto the board. At the connection, the BBF tool will automatically disable the two Main Serial Flash that don’t need to be unsoldered.

The BBF Dual SO8W tool allows working on two Backup Serial Flash providing that they are controlled by the same SPI bus and two different Chip select in the application board.

The BBF tool can be connected to the application with:
- The BBF cable (included) to the application 2X5 2.54mm pin header
- The 2.54mm to 1.27mm cable adaptor-Dual Header (to be purchased separately) to our SMT 1.27mm Pin Headers (to be purchased separately) soldered in place of the Two Main Serial flash footprint for a better stability.
- the Dual SO8 Test Clip (to be purchased separately) with one SO8 Test Clip to be connected on the First Serial flash package soldered on board and two individual test clips to be connected on the Chip select and Hold pin of the second serial Flash soldered on board (no need for connectors).

The two memories can be easily changed manually thanks to the two SO8W sockets or even updated by connecting the SF100 programmer that can update both Serial Flash independently. The SF100 programmer is completely transparent to the application and will offer the developer high flexibility for code trials or update. The BBF tool is frequently used to boot failing computers and use the Flash Utility tools to update the corrupted Bios memories.

Features:
- Compatible with most of the applications (no hardware modification needed)
- Automatically disable the two Main Serial Flash soldered on board (No need to desolder them)
- The two Backup Serial Flash can be easily updated by connecting the SF100 programmer.

Contents:
- 1 * Backup Boot Flash with two SO8W sockets (BBF-D8W)
- 1 * BBF cable with 2.54 pitch 2x5 female header

Optional Purchase:
- SF100 Programmer to update the two Backup Flash
- BBF Test Clip-Dual Flash(SO8)

Hardware Requirement:
- Hold Pin pulled high through a resistor (schematics available by request)

Click Here to download a .pdf file (700KB) which shows how these devices work.

The Backup Boot Flash Module D8W is only AU$154.95 plus Insured Registered postage of AU$16.95. Buy it now and pay securely using Paypal.
Not in Australia? click here to find out cost of postage.