|
The Backup Boot Flash Kit (SO16W) is used as a Serial Flash Emulator for easy code development to reduce your time to market. The Backup Boot Flash Module (included) can be connected to the application by 2 different methods:
- On the Main Serial flash package soldered on board by using our SO16W Test Clip (included).
- On your application 2.54mm (2X5) BBF connector (if application designed with) by using the appropriate BBF cable (included).
Your application will work automatically on the backup Serial Flash inserted in the SO16W socket that can be changed easily or even updated easily for new trials with the SF100 programmer (included). This Kit is completely transparent for the application and will offer to developer high flexibility for code trials or update. The Kit is frequently used to boot failing computers and use the Flash Utility tools to update the corrupted Bios memory.
Features:
- Serial Flash emulator transparent for the application
- Compatible with most of the applications (no hardware modification needed)
- Disable automatically the main serial flash soldered on board (no need to remove it)
- Image download speed at 1Mbits/s to SPI flash and read at 2Mbits/s
- USB Interface
- Signal conflict protections
Contents:
- 1 x SF100 Programmer (SF100)
- 1 x Backup Boot Flash-SO16W(BBF-16)
- 1 x BBF Test Clip-SO16W(BBF-TC-16)
- 1 x BBF cable with 2.54mm pitch 2x5 female header
- 1 x SF100 ISP Cable (ISP1-CB)
Hardware Requirement:
- Hold Pin pulled high through a resistor (schematics available under request)
Click Here to download a .pdf file (700KB) which shows how these devices work.
|
