A NEW Compact Flash to IDE Adapter with PC Backplate

The IDE to CompactFlash Adapter enables you to replace Hard Disk Drives with economical, rugged CompactFlash cards.

You can boot from DOS/Windows/Linux using a CF Card

This Version includes a shielded CF Card slot, LED indicator, PC backplate for easy installation AND improved DMA Support.

This means that you will not experience the short delay while booting and CF Card access is faster.

- Master/Slave jumper allows you run a CF Card and an IDE hard Drive.
- You can choose to boot from the CF Card if required.
- Windows will see this as a Removable Disk with its own drive letter.
- Power supplied via a floppy power conector.
- Your BIOS will see this as an IDE Hard Disk.
- Low Power (less than .5W / less than 100mA)

Note: This is plugged into the IDE interface and is not hot swappable. Power must be off to remove.

Note: CompactFlash cards sold for digital camera use sometimes have strange partition sectors, and may require rewriting (FDISK/MBR) to make them bootable.

What you get:
1 x Brand New CompactFlash Card to IDE Adapter with LED, backplate and Improved DMA Support.

This Adapter is here in Australia ready for immediate delivery.

The CF-IDE is an adapter for connecting a compact flash memory card to a 3.5€� IDE host interface, aiming at educational sectors, IT development, and the embedded technology engineer or enthusiast to enable the use of a compact flash card as an IDE hard drive.

Applications:
Linux or Windows based set-top boxes, routers, firewalls
Diskless network clients
Industrial computers
Any other device requiring rugged solid-state storage

The CF to IDE Adapter w/backplate is only AU$16.95 plus Insured Registered postage of AU$6.95. Buy it now and pay securely using Paypal.
Not in Australia? click here to find out cost of postage.