Adapters for all Universal Device Programmers such as TOP, Xeltek, Labtool, EasyPRO, SmartPRO, Wellon etc. Including the Willem Programmer.
REQUIRE A SPECIAL ADAPTER OR ONE NOT LISTED HERE? JUST ASK US and we will get it for you.

CLICK HERE for Test and Burn-In Sockets, Great for Experimenters.
CLICK HERE to see PLCC Production Sockets.
CLICK HERE for ZIF Sockets.

These Adapters are HERE in Australia ready for IMMEDIATE delivery. As soon as your payment clears they will be posted... --- You will get them in a few days ---
CLICK HERE for Postage to other countries - that means YOU if you do not live in Australia!

Adapter DIP32 to PLCC32 - adds support for:
EEPROM : 28/28C512,010,020,040
EPROM : 27C010,020,040,080
Flash memory : 28F/29C/29F/39F/49F512,010,020,040,001,002,004
Supports 3.3V devices (27LVxx,29LVxx, 28FxxxB3) by removing the jumper on the adapter. (Note: On board PCB4.5c programmer)
NOTE - Works with Willem and all Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, Wellon etc.

Adapter DIP28 to PLCC32 - adds support for:
EEPROM : 28/28C16A,64,128,256
EPROM : 27C64,128,256,512
Flash memory : 28F/29C/29F/39F/49F64,128,256
Supports 3.3V devices (27LVxx,29LVxx, 28FxxxB3) by removing the jumper on the adapter.
(Note: Included FREE with the purchase of a PCB4.5c programmer)
NOTE - Works with Willem and most Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, etc.

Adapter Firmware HUB/LPC for Willem Programmer - adds support for:
FWH : 82802AB/AC, SST49LF002/0030/004/008, AT49LW040/080
LPC : SST49LF020/030/040/080 (Note: On board the PCB4.5c programmer)

Adaptor for P28F002BC (40 pins DIP) for Willem Programmer
 

Adapter TSOP32 to DIP32 (Either a 14 mm or 20 mm device can be soldered onto this adapter) (no socket)
Adds Support for:
EEPROM : 28/28C512,010,020,040
EPROM : 27C010,020,040,080
Flash memory : 28F/29C/29F/39F/49F512,010,020,040,001,002,004
Supports 3.3V devices (27LVxx, 29LVxx, 28FxxxB3) by removing the jumper on the adapter.
NOTE - Works with Willem and most Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, Wellon etc.

Adapter for 24Cxx and 93Cxx surface mount devices for Willem Programmer.
Shown here with a chip soldered on.

Adapter PSOP44 - No Socket- (Am29F/28F200-800) for Willem Programmer
Flash memory : 29F400, 28F800, 28F200, 28F400, 28F,800
1 set = (Solder PSOP44 (Am29F/28F200-800) + Cable adapter (ribbon cable))

Adapter DIP28 to TSOP28 - No socket - solder the chip onto this adapter, too easy!
NOTE - Works with Willem and all Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO etc.

Adapter MCS-51 / AVR + PLCC44 for Willem Programmer - adds support for:

Atmel AT89Cxx (MCS-51) Adapter 32pin to MCS-51
Atmel Auto Setect : AT89C51/52/55 , AT89LV51/52/55
AT89S8252 (8K+2K) AT89S53 , AT89LS8252, AT89LS53
AT89C1051, AT89C2051, AT89C4051 (20pin), AT89C51RC (32KB)
AT89C55WD, (6.2V) SST89C54/58, SI89C52
IntelAuto select : i87C51, i87C51FA , i87C51FB
i8xC51, i8xC52, i8xC54, i8xC58 (tWP = 100uS*25 Pulse)
Atmel AVR 8-bit RISC AT90Sxxx (Parallel programming) Adapter 32pin to MCS-51
(read, write, erase, verify, checkempty, Lockbits, Fusebits) [Flash memory/EEPROM]
AT90S1200, AT90S2313, 90S2333, 90S4433, 90S4414, 90S8515
90S4434, 90S8535 Reference AT90S2313 pin

Adapter 27Cxxxx for Willem Programmer - adds Support for:
EPROM : 27C400, 27C800,27C160, 27C322, 27C4096
27C1024, 27C2048, 27C202, 27C201, 27C220, 27C240
1 set = (Adapter 27C400/800/160/320 + ribbon cable adapter)
Need to program a few? Click Here for optional ZIF Socket.
Need to see how to connect the adapter and ribbon cable? CLICK HERE.

Adapter TSOP40/32 Firmware HUB/LPC for Willem Programmer - adds support for:
Flash memory : SST49LF002/020, SST49LF003/030, SST49FL004/040
SST49FL008/080, AT49V040, W49V004/040, PT49V004

Adapter PSOP44 Socket (Am29F/28F200-800) for Willem Programmer - adds support for:
Flash memory : 29F400, 28F800, 28F200, 28F400, 28F800
1 set = (Adapter PSOP44 Socket (Am29F/28F200-800) + ribbon cable adapter )

SET Adapter TSOP48 Socket (5 in 1) for Willem Programmer - Note adapter is for “long” 20mm devices.  
1 set includes ( TSOP48 LD Socket A + Adapter[ TSOP32 +TSOP40A + TSOP40B + TSOP48 (16bit) + TSOP48 (8/16bit)] + ribbon cable adapter )

SET TSOP48 [no socket] (14 mm, 20 mm) 5 in 1 for Willem Programmer
1 set includes ( TSOP48 (14mm,12mm) + Adapter [TSOP32 +TSOP40A + TSOP40B + TSOP48 (16bit) + TSOP48 (8/16bit)] + ribbon cable adapter )

Adapter for PIC 10Fxxx Surface Mount devices for Willem Programmer - shown here with a chip soldered on.
Set includes
1.Adapter cover DIP 8 PIN
2.Adapter for programing

Adapter MCS48 for Willem Programmer - shown here with a chip inserted.
ROM (read/verify) P8048AH, P8049AH, P8050AH, P8042AH, P8041, P8042 Vea = 12V
OTP (read/verify/Progam) P8748 , P8749H , P8742H Vea = 18V
EPROM (read/verify/Progam) D8748, D8749, D8742, D8741, D8742 Vea = 18V

Adapter for SOIC 8 Surface Mount devices to DIP 8 for Willem Programmer
Supports: 24Cxxx , 93Cxxx , PIC12xxx , 25xxx or SOIC-8 to DIP8
Need to do a few? Check out the SIOC8 to DIP8 Socket Adapter below.

Adapter PLCC32 (All-in-One)
An easy eject socket to use for programming all supported PLCC32 chips. Just press the sides of the socket and the chip is ejected.
Used for DIP32 to PLCC32, DIP28 to PLCC32 and Firmware Hub/LPC and replaces these adapters with one quick eject socket.
Very useful if you program PLCC devices often.
One Socket and Three Socket Adapters - CLICK HERE for supported devices and more information.
NOTE - Works with Willem and all Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, etc

Universal Programming Adapter For PIC Micros - adds support for:
Supports PIC12Fxxx, PIC16Cxxx, PIC16Fxxx, PIC18Fxxx
CLICK HERE to see how to connect this adapter to the Willem Programmer.
Can be used with the Willem Programmer, IDC2 Programmer and debugger and others.

Adapter PLCC44 to DIP40
If your device is a 44 pin PLCC chip then use this adapter if your programmer has a 40/44/48 pin ZIF socket.
NOTE - For all Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, etc. NOT Willem

Buy this now for only AU$12.95 Each plus postage via insured Registered Mail of AU$6.95. This is for Australia ONLY. email me for international postage.

Adapter PSOP44 to DIP44 - Easy Release Socket, no soldering required just place the chip into the Socket.
If you have a 44 pin PSOP device to program such as many car ECU’s then this adapter will work if your programmer has a 44/48 pin ZIF socket.
NOTE - For all Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, etc. NOT Willem

Adapter TSOP32 to DIP32 (14mm) - Easy Release Socket, no soldering required just place the chip into the Socket.
If you have a “short” (14mm) TSOP32 device such as SST39SF020A, SST39SF040, SST39VF020, SST39VF040 etc. then this adapter will work if your programmer has a 32/40/44/48 pin ZIF socket.
NOTE - For all Universal Programmers TOP, Xeltek, Labtool, EasyPRO, SmartPRO, etc.
Also works with the Willem Programmer.<