|
At last, an adapter that will allow you to use a CF card as a hard drive on your SATA motherboard.
Measuring just 50mm wide by 74mm long and a tiny 5mm high you will be able to mount this adapter in even the smallest space.
Perfect for embedded systems.
Uses SATA data and power cables. Good to see a new adapter without a floppy type power connector on it as modern power supplies do not provide them anymore.
This SATA to CF Adapter is designed to enable Compact Flash (CFI/II/III) media to be used as a direct replacement for a 2.5 inch SATA hard drive.
As a result, any equipment, such as Notebook computer, that uses a 2.5 inch SATA hard drive can be easily converted to use the low power and shock resistant CF media. Once installed, the CF appears as an ordinary hard drive to any OS and can be configured as a boot device.
Specification & Features:
Enable Compact Flash (CF) to be used like ordinary 2.5 inch SATA hard drive .
Compatible with CF type I/II/III .
SATA interface .
Mounts directly onto notebook 2.5 inch SATA connector .
CF Card can be the primary bootable device containing the OS and applications.
Transparent to the operating system and does not require any drivers .
Supports DMA and Ultra DMA modes (only on flash media card with such features).
Compatible with DOS, Windows 3.1, NT4, 98SE, Me, 2000, XP, Vista, Mac, Linux .
You can also use two to four of these in a RAID array.
|
