|
The SF100 is a high speed In System Programming programmer designed to update the SPI Flash soldered onto the motherboard. The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.
TheFeatures :
Update Serial Flash soldered on board with application powered or not
Control Application, controller reset and MOSFET isolation status
Capable of handling two serial flash flash memories;(new feature; provided in SF100 with serial number DP001325, firmware 2.0.4, software 2.0.37 and after)
USB Interface
Signal conflict protections
High performance(tested and measured with software version 2.0.37.2 and from a single source of serial flash memory supplier):
|
USB Mode
|
|
|
|
|
|
|
Density
|
8Mb
|
16Mb
|
32Mb
|
64Mb
|
128Mb
|
|
Program
|
7.28s
|
13.09s
|
28.01s
|
52.4s
|
74.01s
|
|
Verify
|
2.57s
|
4.64s
|
8.08s
|
17.09s
|
33.78s
|
|
Auto(Program+Verify)
|
8s
|
14s
|
37s
|
70s
|
108s
|
Hardware:
ISP connector: to connect the programmer and drive the SPI signals, supply the memory and control the controller or application status
Contents:
1x USB cable
1 xSF100 Programmer
1x ISP cable
CDROM with Software and specifications and user manual
Hardware Requirements for ISP:
1) To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download these dedicated application notes: AN0103 (designer) and AN0106 (end user).
2) Download these files for chipset specific BIOS update solutions: sis968chipset.pfd and via8237s.pdf
3) Download this file for information on: In System Programming Solution for SPI firmware update for IA platforms
4) CLICK HERE to see how to use the Backup Boot Flash Tool and SPI Programmer
5) See the default pinout of the SF100, SF100+ and Backup Boot flash devices HERE.
Download the manual here
|
