|
Features:
256 pins universal driving: UP-256 can drive signal and power and supports many BGA FLASH devices.
USB2.0 port communication (compatible with USB1.1): USB supply is sufficient for many devices however a 6.5V plugpack is supplied and recommended.
High speed CPU: Program and arithmetic running in the onboard CPU provides the exact programming speed.
High speed programming: Program and verify the GE28F320B3B 32Mb in 9.5 seconds.
Useful test function for BGA devices: Can test BGA package devices (less than 16X16 arrays), for example mobile telephones CPU etc.
FLASH choice automation: Choose automation for FLASH type devices, just press F5.
Automation in Device types: With this automation certain new devices can be added and updated immediately.
FLASH and RAM test: Read and write the whole FLASH, include FLASH, NAND FLASH, Hi-ROM and RAM.
Auto-test contact of devices: Auto-test, short circuit or bad contact of devices is easily observed with intuitive graphics This feature provides a graphic so you can see which pin is not in contact and where contact should be. This is VERY useful. Works for adapters, bases, pins and most device types.
FIFO communication methods: Advanced FIFO communication methods, full auto-check during program; this makes your programming safe and correct every time.
Flexible hardware configuration: UP-256 is designed for flexible hardware configuration, you can just update your instrument software to support new devices (for certain device types).
One base for all adapters design: You do not need to change the base, all basic sockets and bases are on the programmer already.
Asynchronous one to all program: with one computer, you can run up to 8 UP-256 programmers.
Batch program mode: Batch program mode
CLICK HERE for the List of Supported Devices.
Package:
1x UP256 Programmer
1x 6.5V Power Supply
1x BGA256 Active Socket Adapter (big adapter pictured below)
8x Simple Socket Adapters (see photo below)
1x Software on CD
|
