Xeltek SuperPro 9000U Gang Programmer

- 4 high speed 48pin DIP programming sockets
- Supports 35,592 devices and growing, more than any gang programmer in the market.
- 430+ socket adapters including 150+ FBGA package types supported
- Operates in both PC and stand-alone mode without a PC attached for volume production
- Asynchronous fast programming. Each module is independent from one another.
- Programming starts automatically when a chip is inserted
- High speed programming ISP (In-System Programmable) devices supported
- CE and ROHS Compliant
- No experienced operator with the knowledge of PC or Windows necessary
- Four 128MB compact flash cards included

Just Click on the Device Search Logo above and enter the chip you wish to program to see if it is supported by the Xeltek Programmers - it most likely is!

*** PROGRAMMER COMPARISON ***
Click Here to Compare the Xeltek SuperPro Series to the competitors
YOU WILL BE IMPRESSED!

Features:
(Did we mention that Darkwire Pty Ltd is an official Australian Distributor of Xeltek Products?)

• CE approved.
• Ultra high speed programming in 4 sets of 48 pin DIP sockets each.
• 32 Mb programming in 8 sec and verify in 5 sec, 13 sec total.
• Supports 36,162 devices and over 5,000 Flash devices in all packages types including DIP, SOIC, TSOP, QFP, and FBGA.
• Programs the latest low voltage devices.
• Hundreds of socket adapters available including the latest FBGA types.
• 4 independent programming modules with its own MCU, memory, and pin-drivers for fast and reliable operation.  (Most gang programmers share memory, CPU, and I/O resources)
• Stand-alone or PC mode operation selectable. In stand-alone mode operation, PC connection is not needed.  Instead, 6 key keyboard and 4 line LCD display are used.
• USB 1.1 interface (2.0 version in plan).
• Modular construction of hardware allows for continuing operation when a part of the circuit becomes inoperable. It also makes service quick and easy.
• Clustering programming for multiple units via USB hub.
• For various gang programming solutions
• User expandable Compact Flash (CF) card slot for each programming module to store user project file. Large flash memory chips can be supported by use of larger CF card. 4ea 64MB card included as a standard 1 project/card stored.
• A project file includes device specific and programming information including program data, device-programming algorithm, programming parameters, etc.
• Interface to Labview (option).
• Graphic user interface allows for easy monitoring of high volume production operation.
• Each chip may be programmed with different data such as configuration and calibration information.  This feature is not normally available in standard gang programmers. This is an important and necessary feature to program today's complicated ICs.
• Availability of DLL for OEM users who need to integrate the programmer onto their own equipment. (License fee required)
• Availability of serial number programming. (License fee required)
• Availability of Automatic Device Updater (ADU) service for yearly license fee of $29.95.  With this service, new devices are updated automatically at the user present preset interval (daily, weekly, monthly, or manual) via internet.
• Operator error is minimized by use of a project file, which is normally created and proofs by engineering. The project file is copied onto a CF card and given to the operator.
• Data security is preserved by removing the CF cards for safekeeping when not in use.
• Hands-free operation, Asynchronous and concurrent operation allows a chip to begin programming immediately upon insertion of a chip. The operator merely removes the finished chip and inserts a new chip.  Operator training is also minimized.
• High efficiency for operator and the programmer.  Operator is busy removing and inserting chips, so both the operator and programmer is running continuously at maximum efficiency. In the standard gang programmer operation, the operator is idle while chips are being programmed, and the programmer is idle while chips are being removed and new chips inserted.
• High throughput for volume production Superpro 9000 is 2-5 times faster than the comparable models in the market. Combining it with the non-stop asynchronous operation generally yields more than a typical 8 gang programmer provides.
• High customer value 35,592 device supported (2-4 times the number provided by other gang programmers), fast and efficient programming, and low cost of the units provides unprecedented value to the customer.
• Dual range external power adapter (110V - 240V AC input)
• Dimension (approximate) 50cm(width), 18cm(depth), 6cm(height).
• Free program and device update downloadable on the web.
• Free customer device update service for 1 year.

You can RENTSMART this Item from as little as $34.73 per week*
CLICK HERE for more information.

The Xeltek SUPERPRO 9000U Gang Programmer is only AU$4110.00 plus Insured Registered postage of AU$19.95. Contact us at sales@darkwire.com.au for
information on how to to Buy it Now.
Not in Australia? click here to find out cost of postage.

Back to Device Programmers

Back to On-Line Store

Go To Xeltek SuperPro 3000U Programmer

Go To Xeltek SuperPro 580U Programmer

Go To Xeltek SuperPro 280U Programmer

Go To Xeltek Cluster (Gang) Programming